General Lounge http://www.kyhorsepower.com/forums1/index.php Fri, 10 Sep 2010 16:20:55 -0400 20 http://www.kyhorsepower.com/forums1/index.php http://www.kyhorsepower.com/forums1/index.php?showtopic=59643
Innocent Americans were slaugthered. It could have just as easily been you, your wife, your son, your daughter, your mother, or any combination of the bunch. Just remember that as you watch.

Thanks.]]> dragonZ28 Shadrack Fri, 10 Sep 2010 15:19:40 -0400 59643 http://www.kyhorsepower.com/forums1/index.php?showtopic=59639 ]]> brianw denscor Fri, 10 Sep 2010 09:02:46 -0400 59639 http://www.kyhorsepower.com/forums1/index.php?showtopic=59638 Three New Navy Ships

USS REAGAN
Seeing it next to the Arizona Memorial really puts its size into perspective.... ENORMOUS!



When the Bridge pipes ' Man the Rail' there is a lot of rail to man on this monster: shoulder to shoulder, around 4..5 acres. Her displacement is about 100,000 tons with full complement. (so big, it has its own ZIP code)

Capability
Top speed exceeds 30 knots, powered by two nuclear reactors that can operate for more than 20 years without refueling

1. Expected to operate in the fleet for about 50 years

2. Carries over 80 combat aircraft

3. Three arresting cables can stop a 28-ton aircraft going 150 miles per hour in less than 400 feet

Size
1. Towers 20 stories above the waterline

2. 1092 feet long; nearly as long as the Empire State Building is tall

3. Flight deck covers 4..5 acres

4. 4 bronze propellers, each 21 feet across, weighing 66,200 pounds

5. 2 rudders, each 29 by 22 feet and weighing 50 tons

6. 4 high speed aircraft elevators, each over 4,000 square feet

Capacity
1. Home to about 6,000 Navy personnel

2. Carries enough food and supplies to operate for 90 days

3. 18,150 meals served daily

4. Distillation plants provide 400,000 gallons of fresh water from sea water daily, enough for 2,000 homes

5. Nearly 30,000 light fixtures and 1,325 miles of cable and wiring 1,400 telephones

6. 14,000 pillowcases and 28,000 sheets


USS BILL CLINTON
The USS William Jefferson Clinton (CVS1) set sail today from its home port of Vancouver , BC


The ship is the first of its kind in the Navy and is a standing legacy to President Bill Clinton 'for his foresight in military budget cuts' and his conduct while holding the (formerly dignified) office of President.

The ship is constructed nearly entirely from recycled aluminum and is completely solar powered with a top speed of 5 knots. It boasts an arsenal comprised of one (unarmed) F14 Tomcat or one (unarmed) F18 Hornet aircraft which, although they cannot be launched on the 100 foot flight deck, form a very menacing presence.

As a standing order there are no firearms allowed on board.

This crew, like the crew aboard the USS Jimmy Carter, is specially trained to avoid conflicts and appease any and all enemies of the United States at all costs.

An onboard Type One DNC Universal Translator can send out messages of apology in any language to anyone who may find America offensive. The number of apologies are limitless and though some may seem hollow and disingenuous, the Navy advises all apologies will sound very sincere.

In times of conflict, the USS Clinton has orders to seek refuge in Canada .

USS BARACK OBAMA
This ship will be used to ferry illegals across the Rio Grande to pick up their welfare checks as advance payments for their democratic votes.


Details are as vague as his past, his economic policies and his credentials to lead.

But don't you worry......he has a plan! ]]> brianw Dalton Fri, 10 Sep 2010 08:10:39 -0400 59638 http://www.kyhorsepower.com/forums1/index.php?showtopic=59632
RIP iPhone 3GS

PHUCK!!!!!!!!!]]> ShorTuning anti-venomLS1 Thu, 09 Sep 2010 23:47:52 -0400 59632 http://www.kyhorsepower.com/forums1/index.php?showtopic=59625 Now Im looking for a 03-04 z06 or a ls1 car even considering something AWD. chad95 SSThunder Thu, 09 Sep 2010 20:17:25 -0400 59625 http://www.kyhorsepower.com/forums1/index.php?showtopic=59623
Also, there's a Pull-a-part not even 10 minutes from my house with acres upon acres of cars. If anybody is looking for any hard to find parts and needs some leg work in this city, don't be afraid to ask.

Also, thanks to those who've helped make this move as painless as possible.
]]> Thu, 09 Sep 2010 17:50:05 -0400 59623 http://www.kyhorsepower.com/forums1/index.php?showtopic=59621
Thanks everyone.]]> Randall blackroush Thu, 09 Sep 2010 15:14:38 -0400 59621 http://www.kyhorsepower.com/forums1/index.php?showtopic=59620
Specs-
http://media.ford.com/images/10031/2012_Mu..._Boss_Specs.pdf

Press info * Must read IMO*-

http://media.ford.com/press_kits_detail.cf...section_id=2858


Discuss.

]]> 331 lx ZO6Mike Thu, 09 Sep 2010 14:29:09 -0400 59620 http://www.kyhorsepower.com/forums1/index.php?showtopic=59619
I tried calling my Aunt that works in the courthouse and she didn't answer. Need an answer fairly quickly. This guy is wanting my car and the car will be driving the 5.5hr trip to Pittsburgh, PA if he calls me back and tells me yes or no. We've settled on price and everything and he has narrowed it down to 3 cars and is going to let me know something today for sure. I've never sold a car out of state before, and would like to have some advice on what exactly I need to do.

Thanks]]> Shadrack Shadrack Thu, 09 Sep 2010 13:40:17 -0400 59619 http://www.kyhorsepower.com/forums1/index.php?showtopic=59616
Looking to do Sonic Blue (paint code SN) closest I know of to UK blue

Let me know who/where

]]> Crazyone Z28_1320 Thu, 09 Sep 2010 12:33:18 -0400 59616 http://www.kyhorsepower.com/forums1/index.php?showtopic=59613 One year, I decided to buy my mother-in-law a cemetery plot as a Christmas gift...
The next year, I didn't buy her a gift.
When she asked me why, I replied,
"Well, you still haven't used the gift I bought you last year!"
And that's how the fight started.....
________________________________
My wife and I were watching Who Wants To Be A Millionaire while we were in bed.
I turned to her and said, 'Do you want to have Sex?'
'No,' she answered. I then said,
'Is that your final answer?'
She didn't even look at me this time, simply saying, 'Yes..'
So I said, "Then I'd like to phone a friend."
And that's when the fight started...
________________________________
I took my wife to a restaurant.
The waiter, for some reason, took my order first.
"I'll have the rump steak, rare, please."
He said, "Aren't you worried about the mad cow?"
"Nah, she can order for herself."
And that's when the fight started.....
________________________________
My wife and I were sitting at a table at her high school reunion, and she kept staring at a drunken man swigging his drink as he sat alone at a nearby table.
I asked her, "Do you know him?"
"Yes", she sighed,
"He's my old boyfriend.... I understand he took to drinking right after we split up those many years ago, and I hear he hasn't been sober since."
"My God!" I said, "Who would think a person could go on celebrating that long?"
And then the fight started...
________________________________
When our lawn mower broke and wouldn't run, my wife kept hinting to me that I should get it fixed. But, somehow I always had something else to take care of first, the shed, the boat, making beer.. Always something more important to me. Finally she thought of a clever way to make her point.
When I arrived home one day, I found her seated in the tall grass, busily snipping away with a tiny pair of sewing scissors. I watched silently for a short time and then went into the house.. I was gone only a minute, and when I came out again I handed her a toothbrush. I said, "When you finish cutting the grass, you might as well sweep the driveway."
The doctors say I will walk again, but I will always have a limp.
________________________________
My wife sat down next to me as I was flipping channels.
She asked, "What's on TV?"
I said, "Dust."
And then the fight started...
________________________________
Saturday morning I got up early, quietly dressed, made my lunch, and slipped quietly into the garage. I hooked up the boat up to the van, and proceeded to back out into a torrential downpour. The wind was blowing 50 mph, so I pulled back into the garage, turned on the radio, and discovered that the weather would be bad all day. I went back into the house, quietly undressed, and slipped back into bed.. I cuddled up to my wife's back, now with a different anticipation, and whispered, "The weather out there is terrible."
My loving wife of 5 years replied, "And, can you believe my stupid husband is out fishing in that?"
And that's how the fight started...
________________________________
My wife was hinting about what she wanted for our upcoming anniversary.
She said, "I want something shiny that goes from 0 to 150 in about 3 seconds."
I bought her a bathroom scale.
And then the fight started......
________________________________
After retiring, I went to the Social Security office to apply for Social Security.
The woman behind the counter asked me for my driver's License to verify my age.
I looked in my pockets and realized I had left my wallet at home.
I told the woman that I was very sorry, but I would have to go home and come back later.
The woman said, 'Unbutton your shirt'.
So I opened my shirt revealing my curly silver hair.
She said, 'That silver hair on your chest is proof enough for me' and she processed my Social Security application..
When I got home, I excitedly told my wife about my experience at the Social Security office...
She said, 'You should have dropped your pants. You might have gotten disability, too.'
And then the fight started...
________________________________
My wife was standing nude, looking in the bedroom mirror.
She was not happy with what she saw and said to me, "I feel horrible; I look old, fat and ugly.
I really need you to pay me a compliment.'
I replied, "Your eyesight's damn near perfect."
And then the fight started........ ]]> shum Formula_LT1 Thu, 09 Sep 2010 09:28:44 -0400 59613 http://www.kyhorsepower.com/forums1/index.php?showtopic=59612
http://www.craigslist.org/about/best/orl/1737878952.html]]> shum COOTERGUY Thu, 09 Sep 2010 09:23:06 -0400 59612 http://www.kyhorsepower.com/forums1/index.php?showtopic=59611 http://www.mautofied.com/listing-100325075.htm

read the description 400+ hp hahaha but, and the car does not have a cam..just sounds like it does..but seen that and couldn't help but laugh]]> 94hawk SexyTransAm Thu, 09 Sep 2010 03:38:10 -0400 59611 http://www.kyhorsepower.com/forums1/index.php?showtopic=59610 Anyone have one they can lend or rent out? Turkish Andy Thu, 09 Sep 2010 02:07:49 -0400 59610 http://www.kyhorsepower.com/forums1/index.php?showtopic=59596



Everytime I see an old pick-up with the huge flaired fenders and bedside I want one more and more. I really have no clue about these trucks. I mean NO CLUE. It's so bad I don't even know if I want a ford or a chevy, but I do know that I'm going to end up buying one.

What I'm seeing is that I'm attracted to the late 40's early 50's trucks. Ideally, I'd like to do a modern drive train, but I'd be getting the cart ahead of the horse here. Does anyone know any good sites to do some research? Anyone have experience with these trucks that might be able to point me in the right direction or offer any insight on where I should start, what I should look for, etc.

I saw this one located in Ashland, what do you guys think? Anyone know the truck?

http://www.ford-trucks.com/forums/970738-52-ford-f1.html]]> 1964coupe Robert Wed, 08 Sep 2010 16:36:51 -0400 59596 http://www.kyhorsepower.com/forums1/index.php?showtopic=59591 chillin joseph_flynn007 Wed, 08 Sep 2010 13:42:47 -0400 59591 http://www.kyhorsepower.com/forums1/index.php?showtopic=59589
have cash - will pay.]]> D1scLTX D1scLTX Wed, 08 Sep 2010 12:43:57 -0400 59589 http://www.kyhorsepower.com/forums1/index.php?showtopic=59580 I also got the motor ready to go to Roberts as soon as i give him a call and he gives me the go ahead, number 6 was the problem spun a rod bearing. The crank and rod cap dont look to bad to me, but in all honesty im not sure what would be real bad looking. I did take my finger nail and run it over the rod cap and could not feel any groves but there is discoloration on the cap. On the crank doing the same thing i can feel a few groves but nothing that i hope cant be turned. Well wish me luck and maybe ill get to drive it some this time!.]]> Rickys S/C Z28 PrimeTime Wed, 08 Sep 2010 02:38:40 -0400 59580 http://www.kyhorsepower.com/forums1/index.php?showtopic=59552 1999 mustang cobra

Everything is NEW
4V V8
43,000 Miles
T45 5 Speed
Soild 8.8 Rear diff
Wingless Decklid. No holes!
Rio Red Exterior (e8)
Black on black leather INTERIOR.
V2 SQ Vortech Supercharger. 12lbs (Polished)
Vortech Maxflow cooler.(Polished)
Vortech Mini Race Blow off valve. (Polished)
BBK 65mm ported Throttle body. (Polished)
Snow performance Meth Injection.
Snow performance Safe injection.
AFM Power pipe.
DiabloSport Mafia.
DiabloSport Tuner
90mm Lighting Mas.
K&N 12" Filter
42lb injectors.
SVT Focus Fuel pump.
Kenne Bell Boost a Pump(BAP)
Afco Dual Pass HE
Canton Exp tank. (Polished)
Canton Power steering Res.(Polished)
Canton Cooling tank.
MGW. Shifter.
FMS 355 gears.
King Cobra clutch.
Steeda ADJ Clucth quadrant.
Apex Racing pads.
Tein Lowering Springs
Mac ORH pipe.
SLP Stainless PRO FLOW catback
Steeda battery relocation box.
2004 Cobra front fascia. OEM
Niche PI Y2K CF hood. Fully Vented!
Saleen S281 Rear bumper. OEM
SOS dual gauge pods.
Raptor Shift light
AEM Wide band.
AEM boost Gauge.
Custom Smoked out, tinted tails lights.
Ported Heads.
Ported and polished Upper intake.
Clean Car Report

this is what hes email said. I bought 99% of the $14,000+ worth of mods through him. Conservative 8 lbs of boost 465RWHP 445TQ. Since then I have added a Intercooler and meth injection for added protection againt heat. Also installed a 10-12lb pullie for more boost. No its has not been dynoed since. Thus... needs one more to dial it back in for AT's, FP and timing. However...I wont allow more then 500 510 at the rear wheels with the current pistons and rods.When we we tuning it we had to pull alot out because it was making way to much power and kept on pulling past 7200 without any sign of dropping. Its a very healthy engine SVT gave me. Some are good some are better! Mine kicks ass! When I just put a programer on it and a CAI and exhaust we picked up 65. Tells you too things... Engine responds well and the tuner knows his shit!

The car has never seen the track but with this setup and good sticky tires and the 8.8 in now vs the IRS crap it should be Mid to low 10's all day. 9's if you want to add better pistons, rods and bolts and up the boost w/ a more aggresive tune. It has the mods that will produce over 650 but the pistons and rods wont handle that type of power. The cobra Crank will but in 99 01 the rods and pistons are the weak link / factor. 03-04 cobras have much better pistons and rods. 98-99 has the best block though. Teksid! I have seen a few supercharged guys (99-01) running around with half the mods as me running 550 RWHP and not even a intercooler. Stupid if you ask me but some people dont care how long their car lasts. I built this to last and it has plenty of power for both the street and track.
]]> aslp19 Black 99 Bird Tue, 07 Sep 2010 17:50:29 -0400 59552 http://www.kyhorsepower.com/forums1/index.php?showtopic=59543 We just bought a new car this past weekend and I want to get the windows tinted. I have had Trail Blazers and Ameritint do some of my vehicles in the past. They did an ok job but nothing great. Any suggestions? drewk86 Saul Tue, 07 Sep 2010 12:55:33 -0400 59543 http://www.kyhorsepower.com/forums1/index.php?showtopic=59539
'87 toyota 2wd LWB, not a looker by any means, but I got it to build a minitruck out of...it WAS a decent platform.

I got hit in the rear by some dude this past saturday, folded the bumper up underneath the truck and destroyed the driver's side lower bed side. If it wasn't a little rusty, it'd have been the whole bed side. The impact also destroyed the factory "roll pan" that older toyotas were blessed with, and tweaked the last 10" or so of the driver's side frame rail (behind the shackle mount).

Looking for someplaces in town to give me estimates, mainly because that guy's insurance is going to cover it.

I'm not looking to take it back stock, it'd be cheaper for everybody if I just had that corner replaced and a roll pan welded in. I've already sourced parts. Replacement lower rear corners are $60, and a roll pan is around $100. I'd like to have someone look it over. Like I said, I don't have internet yet, so it'd be easier to call me (six OH! six) five four seven thirteen fifty five. My name's Chris. Thanks !


]]> XSIVHP Tue, 07 Sep 2010 11:14:33 -0400 59539 http://www.kyhorsepower.com/forums1/index.php?showtopic=59516 sskiller sskiller Mon, 06 Sep 2010 22:55:14 -0400 59516 http://www.kyhorsepower.com/forums1/index.php?showtopic=59507 csilvers1984 prot50 Mon, 06 Sep 2010 20:51:57 -0400 59507 http://www.kyhorsepower.com/forums1/index.php?showtopic=59499
shops are con artists. $60+ an hour might as well be robbery. alldata lists cams swap as 9 hours, i would like the timing components changed too. almost all the timing components have to come off to do the cam swap anyway, but i figure an extra hour of pay is fair anyway.

so how much is 10 hours of work worth? im sure someone with experience could get it done in less that 10 hours even, which just means more profit for them.

i would like to put cams in my 02 gt in a few months but im trying to figure out total cost. i can do it myself, but i dont really want to. i figure i can just work overtime at my job and come out even. i do maintenence work and normal bolt on type work myself. i would rather leave any internal engine work, anything to do with gears, or cams/timing to someone else.]]> drewhenderson13 slowgt Mon, 06 Sep 2010 17:33:48 -0400 59499 http://www.kyhorsepower.com/forums1/index.php?showtopic=59486 Happy birthday homo, have a good one. git_sum PimpRohr Mon, 06 Sep 2010 11:03:21 -0400 59486 http://www.kyhorsepower.com/forums1/index.php?showtopic=59478
any ideas?]]> 65fastback2+2 LEVID Sun, 05 Sep 2010 21:58:08 -0400 59478 http://www.kyhorsepower.com/forums1/index.php?showtopic=59472




and what can i say, bourbon, women and go fast goodies.. cant get much better than that...
]]> roman_back roman_back Sun, 05 Sep 2010 19:36:42 -0400 59472 http://www.kyhorsepower.com/forums1/index.php?showtopic=59458

]]> D1scLTX D1scLTX Sat, 04 Sep 2010 23:17:05 -0400 59458 http://www.kyhorsepower.com/forums1/index.php?showtopic=59456

http://cgi.ebay.com/ebaymotors/2005-LANCER...=item2a0a026257]]> pharmd 83-88T-Bird Guy Sat, 04 Sep 2010 22:54:15 -0400 59456 http://www.kyhorsepower.com/forums1/index.php?showtopic=59455 http://www.kyhorsepower.com/forums1/index....showtopic=59454]]> Double Nickel Double Nickel Sat, 04 Sep 2010 21:56:28 -0400 59455 http://www.kyhorsepower.com/forums1/index.php?showtopic=59448

NICK ABNEY Winchester KY]]> blackroush midnightblue02 Sat, 04 Sep 2010 19:03:44 -0400 59448 http://www.kyhorsepower.com/forums1/index.php?showtopic=59435
I had an issue awhile back with my valve seals, being chewed up, and in my oil. Well, it's came back within 3k miles. . . the valve seals are being pushed up the guides and getting damaged(found the valve seal spring in my oil during a change again). This is the second time with this valve seal issue, and two different sets of Valvesprings.

I have a "stalker" cam from Ragin(One of the original ones i believe). The original issue was on the original Ragin Stalker package valvespring kit, AFR 8019's i think. So i switched to a fresh Patriot Extreme kit. . . and the issue has came back. I called and talked to someone at Ragin today about the issue, and they recommend their new springs. I've already been through two different sets of valvesprings, something isn't adding up. Could the cam have too aggressive lobe separation? the car doesn't see above 7k rpms.

the only original piece of this cam swap is the cam itself, and the issue is still there. . .

should I look at changing the cam, or should I consider a different Valvespring again. . . the Patriot Extremes should be more than enough for the specs of this cam, and Patriot says the springs should be just fine for the application.

Thanks in advance

Mike]]> ZO6Mike ShorTuning Sat, 04 Sep 2010 00:01:21 -0400 59435 http://www.kyhorsepower.com/forums1/index.php?showtopic=59426 I wait around till Monday and call that evening and again, same thing. Haven't had a chance to look at it. I just said heck with it, I'll give them a chance to fix it. I wait till Wednesday evening, give them a call. Now, I get an explanation of why they still haven't looked at my truck. Supposedly a truck took much longer than expected on the lift and backed everything up. They have it out of the shop and they pulled the next one in and I'm the one after that. He said we should get to tomorrow (Thursday). Okay, that sucks, but whatever, I understand stuff comes up. I just now called and THEY STILL HAVEN'T LOOKED AT MY TRUCK!!! WTF!??

Okay, for some reason, it just really got to me, he gave me the same thing the past two times I talked to him. I mean, if they knew they couldn't get to it for a few days, why didn't they just say hey, come get your truck and bring it in when we have a spot open because it's not like my truck is not drivable. I got a little firm, but was nice about it and just simply stated that I hated to keep calling about it, but I'm actually borrowing someones truck to get back and forth to work and they are needing their truck back. He said I understand, you are at the top of the list, and we will get you in the shop before the day is over and check out. I'm calling BS on that, and the more I think about it, the more I'm wanting to call back and tell them i'm coming to get my truck or they need to give me a damn loaner vehicle. This is getting crazy. My truck has been sitting down there for OVER A WEEK and no one as even went as far as to open up the damn hood and just LOOK at it. GAHHH!!!! I'm usually a really cool headed guy about this kind of stuff but this is starting to get on my nerves!
I know a few people here work at dealerships, and I hate to be an asshole, but what do you all think? Is that bullshit or does stuff like this happen all the time?? ]]> Shadrack Shadrack Fri, 03 Sep 2010 15:47:33 -0400 59426 http://www.kyhorsepower.com/forums1/index.php?showtopic=59420 Just letting everyone know these guys will be raffling a vehicle off soon.
Can't let all the details go with it because it will be kept secret until the revealing, More info to be released on this at a later date. It will be revealed at one of the upcoming shows. For a look at the band please visit
http://www.myspace.com/kentuckyswitchmen

Raffle Tickets will be $5.

Here's some of what will be done to the vehicle.

Two tone custom paint job.
18" Ballistic Rims
Xbox360 with Wireless Controllers/ MW2 On The Go!
Sound System
Custom Airbrushed Guitar, Signed by the band.
Tinted windows and taillight/turn signals
HID Lights
Custom Graphics
DVD Player In Dash
Custom Build Plaques.
The vehicle is an suv, And I can assure you that when it get's finished. For $5 you won't be able to beat the chance of winning it. Clear title will be signed over at the time of drawing. Winner will be responsible for title transfer, taxes, insurance, etc.
More details to come soon.
Message me if you are interested in buying tickets.
Thanks!]]> 04hemigtx1990 04hemigtx1990 Fri, 03 Sep 2010 07:45:02 -0400 59420 http://www.kyhorsepower.com/forums1/index.php?showtopic=59410 Someone posted an awesome pic of a 2011 Shelby with the Sterling Gray Met. paint and the mesh style wheels a month or so ago and I am trying to find it. I have a friend looking to buy one and I want him to see that pic. turbochad Mazdaman Thu, 02 Sep 2010 21:33:46 -0400 59410 http://www.kyhorsepower.com/forums1/index.php?showtopic=59402 Title says it all. ScrewOnBudnik20 ScrewOnBudnik20 Thu, 02 Sep 2010 16:15:08 -0400 59402 http://www.kyhorsepower.com/forums1/index.php?showtopic=59395 Need a hoist for engine swap. Called rental shops, nobody seems to rent a hoist in Lexington. Any suggestions? Prosts10 Prosts10 Thu, 02 Sep 2010 11:11:22 -0400 59395 http://www.kyhorsepower.com/forums1/index.php?showtopic=59394 Dear Abby,

I am a crack dealer in Paducah , KY who has recently been diagnosed as a carrier of HIV virus.

My parents live in Bowling Green . One of my sisters lives in Taylorsville and is married to a
transvestite.

My father and mother have recently been arrested for growing and selling marijuana.
They are financially dependent on my other two sisters, who are prostitutes in Louisville.

I have two brothers: one is currently serving a non-parole life sentence at Eddyville for the
murder of a teenage boy in 1994. My other brother is currently in jail awaiting charges of soliciting a prostitute and possession of marijuana. I have recently become engaged to marry a former prostitute, who currently lives in Lexington . She is still a part time "working girl".

All things considered, my problem is this. I love my fiancé' and look forward to bringing her into the family. I certainly want to be totally open and honest with her.

Should I tell her about my cousin from Ashland , who is an Obama supporter?

Signed,

Worried About My Reputation]]> brianw 358chevycamaro Thu, 02 Sep 2010 10:53:30 -0400 59394 http://www.kyhorsepower.com/forums1/index.php?showtopic=59391
Thanks in advance
Brandon
859-361-1476]]> Crazyone Justin Ramsey Thu, 02 Sep 2010 09:19:52 -0400 59391 http://www.kyhorsepower.com/forums1/index.php?showtopic=59387
[img]The rod runs are coming up and anyone headed east this way, it's not much farther up the road on 81 to Bristol and that Friday it time to shit or get off the pot for the Empires Outlaws. Will either of the fastest 82 yr old on the planets corvettes out pace his 7 second Slowbalt of doom and will he break 200mph? Sam Brickey's Blacout Foxbody just laid down an 8.15 pass on no prep, will he take out Kinzer? Is John Phillips going let them have it or will he bring out the 7.9x capable Z? The Rematch of the year with 600ci with enough nitrous to blow up a small town Wreckless against the Frankenstein freight train Qtrpndr. Onfires 8 sec full interior a/c power windowed firehawk beast...too many to list...This is gonna be an awesome night to watch some good ole fashioned heads up racing. Darren Burrnett's looking for 200mph on his busa deep into the sevens. I said I would tell you guys when the trip would be worth it, this is an open tnt night so anyone can run, watch, hang, but only a few will qualify for quick 8.
Then Sat in Gatlinburg to see all the cool hard parked cars. ]]> Infamous™ Billnz28 Thu, 02 Sep 2010 03:21:37 -0400 59387 http://www.kyhorsepower.com/forums1/index.php?showtopic=59386
589rwhp/513rwtq through a 4000 stall and a 4L65E

VS RPM



VS Speed

]]> ShorTuning PrimeTime Thu, 02 Sep 2010 00:30:47 -0400 59386 http://www.kyhorsepower.com/forums1/index.php?showtopic=59384
its a 70 camaro with a High horse 454 out of a 70 chevelle... mild cam. Turbo 400 w/ b&m ratchet shifter.... Hooker competition headers into 3" exhaust. paint 7 out of 10, truck, floors, frame in great shape. 10 bolt 3.73 gear
pretty good interior and stuff.

just letting you kno my problems.. lol ]]> 98 Firebird 98 Firebird Wed, 01 Sep 2010 22:19:52 -0400 59384 http://www.kyhorsepower.com/forums1/index.php?showtopic=59366 Does anyone local (Lex, Ville, Cincy, Nashville, Indy) do service on a Maggie or am I resigned to shipping it back to Cali? I have had a bearing failure in the rear, hope it is just the jack bearing since it seems to be the cheapest. the Magnuson tech listened over the phone and said it could be anywhere fom $305 (jack bearing) to $1000 (multiple failures). MauiV KySilverado Wed, 01 Sep 2010 13:44:14 -0400 59366 http://www.kyhorsepower.com/forums1/index.php?showtopic=59340








wish i would have seen it had no tag on it before i drove it to town today with the open headers ?



]]> yrusoslow cagedhatch Tue, 31 Aug 2010 19:09:13 -0400 59340 http://www.kyhorsepower.com/forums1/index.php?showtopic=59320
1st woman: Hi! Wanda.

2nd woman: Hi! Sylvia. How'd you die?

1st woman: I froze to death.

2nd woman: How horrible!

1st woman: It wasn't so bad. After I quit shaking from the cold, I began to get warm & sleepy, and finally died a peaceful death. What about you?

2nd woman: I died of a massive heart attack. I suspected that my husband was cheating, so I came home early to catch him in the act. But instead, I found him all by himself in the den watching TV.

1st woman: So, what happened?

2nd woman: I was so sure there was another woman there somewhere that I started running all over the house looking. I ran up into the attic and searched, and down into the basement. Then I went through every closet and checked under all the beds. I kept this up until I had looked everywhere, and finally I became so exhausted that I just keeled over with a heart attack and died.

1st woman: Too bad you didn't look in the freezer ---we'd both still be alive]]> 98CHEROKEE sonic 4.6 Tue, 31 Aug 2010 11:32:47 -0400 59320 http://www.kyhorsepower.com/forums1/index.php?showtopic=59318 some help lol! Saul KY_Z28 Tue, 31 Aug 2010 09:18:31 -0400 59318 http://www.kyhorsepower.com/forums1/index.php?showtopic=59310
]]> Saul 92coupe Mon, 30 Aug 2010 22:12:44 -0400 59310 http://www.kyhorsepower.com/forums1/index.php?showtopic=59309 Jacob1 358chevycamaro Mon, 30 Aug 2010 21:07:23 -0400 59309 http://www.kyhorsepower.com/forums1/index.php?showtopic=59303 I dropped my vette off at ky speed saturday for a textralia 0z 700 clutch install, and dyno. The car had been slipping on the top end some, and it wouldnt hold a second gear burnout. I am very happy with the stock clutch however, because i ran it for 5 years, and the last two with a procharger. I am very excited about the textralia clutch, and i cant wait to try it out. The car should make close to 600 rwhp on 10 psi and meth, i guess we will just have to wait and see. procharged c6 procharged c6 Mon, 30 Aug 2010 17:40:39 -0400 59303 http://www.kyhorsepower.com/forums1/index.php?showtopic=59278 bj adams 72maverick Sun, 29 Aug 2010 15:44:17 -0400 59278